Price: $24.90
Including shipping
world wide
The DRV8818 provides an integrated stepper motor driver solution for printers, scanners, and other automated equipment applications. The device has two H-bridge drivers, as well as microstepping indexer logic to control a stepper motor
Specifications:
- Pulse Width Modulation (PWM) Microstepping Motor Driver
- Built-In Microstepping Indexer
- Up to 8 Microsteps/Step
- Step and Direction Control
- Programmable Mixed Decay, Blanking, and Off Time
- Up to 2.5-A Current Per Winding
Input Connections:
DRV8818 Datasheet :
http://www.ti.com/lit/ds/symlink/drv8811.pdf
Microstep Selection:
Current Setting:
To set the max current per phase place voltage meter from gnd to REF. Then follow table below to get your desired current by adjusting the Cur pot.
Voltage | Current |
---|---|
0.8V | 1A |
1.2V | 1.5A |
2.6V | 2A |
2V | 2.5A |