gnexlab controller card ver 1.0

This product is no longer available



  • Standalone No PC Connection Required
  • Based on the Arduino Diecimila ( Atmega 8 )
  • 2×16 LCD
  • two trim-pots (to set two separate temperature values, one for nozzle one for the build platform)
  • 2  Power Transistor Outputs
  • 2 Relay Outputs
  • 2 Thermistor Input
  • 1 Thermocouple input (AD595)
  • Can Be Powered With ATX PC Power Supply

This board is controlling and monitoring the temperatures of the hot end and the build platform and it works as a stand alone device with no PC connection. This is very important because Mach3 is not tolerant of any serial communication while it is producing it’s pulse stream to the motor drivers.

The pictures of the board

Schematic (PDF File)

Download the Eagle Files here

Arduino Code

1 thought on “gec1.0”

  1. hi,
    these files are no longer available.
    i was hoping to mill my own board.
    i think this board is easy to make then the ver 2.
    can u help

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s